Introduction: Titanium Eyewear MOQ Is Not Just One Number

Many eyewear brands start with the same question:

“What is your MOQ for titanium frames?”

It is a normal question.

Every buyer needs to know the starting quantity.
Every brand needs to plan budget.
Every private label project needs to control risk before the first bulk order.

But for custom titanium eyewear, MOQ is rarely just one fixed number.

Why?

Because MOQ can come from different parts of the project.

It may come from the frame material.
It may come from the color.
It may come from the surface finishing.
It may come from the logo method.
It may come from the lens.
It may come from the packaging.
It may come from tooling or mold development.

So when a brand asks, “What is the MOQ?” the better question is actually:

“Which part of this titanium eyewear project is driving the MOQ?”

That question is much more useful.

For example, using an existing titanium frame with a small inside-temple logo may be easier to start.

But developing a fully custom pure titanium frame with beta titanium temples, matte navy finishing, special hinges, polarized lenses, and premium packaging will need a very different MOQ and sampling budget.

Both are custom titanium eyewear projects.

But they are not the same level of customization.

This is why MOQ should be discussed by component, not guessed as one simple number.

For eyewear brands, the goal is not always to find the lowest MOQ.

The real goal is to build a project with the right customization level, realistic sampling cost, stable bulk quality, and room for future reorders.

That is how a titanium eyewear program becomes commercially workable.

1. What Does MOQ Mean in Custom Titanium Eyewear?

MOQ means minimum order quantity.

In custom titanium eyewear, MOQ refers to the minimum quantity required to start production under a specific material, design, color, logo, lens, or packaging setup.

That last part is important.

MOQ is not only about the frame itself.

It is about the production setup behind the frame.

If a brand uses standard frames, standard colors, standard packaging, and simple logo customization, the starting quantity may be easier to manage.

If the brand wants custom color, custom structure, special surface finishing, custom lenses, and full private label packaging, the MOQ will usually increase.

Not because the factory wants to make it difficult.

But because every custom part needs preparation.

1.1 Simple Definition of MOQ

In simple terms, MOQ is the smallest quantity a factory can produce reasonably for one project setup.

For titanium eyewear, that setup may include:

• frame material
• frame structure
• surface color
• logo method
• lens option
• packaging style
• production tooling
• QC standard

For example, a buyer may ask for 100 pieces of custom titanium frames.

If the frames use an existing shape, standard color, and simple logo, it may be possible depending on the factory’s setup.

But if the same buyer wants a new mold, custom matte color, beta titanium temples, and custom printed hard cases, 100 pieces may not cover the production preparation.

The issue is not only quantity.

It is preparation cost.

That is why MOQ exists.

It helps balance production setup, material sourcing, labor, tooling, surface finishing, and quality control.

1.2 Why Titanium Eyewear MOQ Is Different from Plastic Frames

Titanium eyewear is different from basic plastic or injection frames.

A plastic frame project may mainly involve mold, injection, polishing, assembly, color, and packaging.

Titanium frames involve more precision work.

There is cutting.
Forming.
Welding.
Polishing.
Surface finishing.
Alignment.
Lens fitting control.
Hinge adjustment.
Temple pressure control.

And because titanium eyewear is usually positioned as a premium product, buyers often expect better consistency.

The welds should look clean.
The surface color should be stable.
The temples should open smoothly.
The frame should sit level.
The lens groove should be accurate.
The final product should feel precise.

That level of control affects cost and MOQ.

For example, a matte black titanium frame may need more surface control than a basic plastic frame in black.

A beta titanium temple needs elasticity control.

A rimless titanium frame needs screw and drilling accuracy.

A 6-base or 8-base titanium sunglass needs lens curve matching.

So titanium eyewear MOQ is not only about “how many pieces.”

It is about how much technical work is required to make the pieces correctly.

1.3 MOQ vs Sampling Cost vs Tooling Cost

Many buyers mix these three terms together:

MOQ.
Sampling cost.
Tooling cost.

But they are not the same.

MOQ is about bulk production quantity.

Sampling cost is about developing and confirming the sample before production.

Tooling cost is about creating the tools, molds, fixtures, or special setup needed for a new design.

For example, if a brand chooses an existing titanium frame and only adds a small logo, tooling cost may not be needed.

But if the brand wants a new bridge shape, custom temple design, special hinge, or exclusive frame structure, tooling or fixture cost may apply.

Sampling cost may also increase because the factory needs to test the structure, finish, and lens fitting.

So when a supplier quotes a project, brands should ask clearly:

Is this MOQ for bulk order?
Is this sampling cost for one sample or one design?
Is tooling cost included?
Is packaging included?
Is logo setup included?
Is lens fitting included?

Clear questions prevent confusion later.

2. Existing Titanium Frames vs Fully Custom Titanium Frames

One of the biggest factors affecting MOQ is whether the brand uses an existing titanium frame or develops a fully custom frame.

This is the first decision brands should make.

Not every project needs a new mold.

In fact, many smart first orders start with existing titanium frames.

Then the brand customizes logo, color, lens, packaging, or product card.

That can already create a professional private label product without taking on too much risk.

Fully custom titanium frames are better for mature brands with clear design direction and stable sales forecasts.

Both options have value.

The key is choosing the right one for the brand’s stage.

2.1 Existing Titanium Frames with Logo

Using existing titanium frames is usually the most practical way to start.

It is suitable for:

• new eyewear brands
• optical retailers testing titanium products
• private label first orders
• low-risk launch projects
• fast delivery programs
• wholesalers testing market demand

This type of project may include:

• existing frame shape
• standard titanium material
• available frame colors
• small logo customization
• standard or semi-custom packaging
• demo lenses or selected lens options

For example, a new optical brand may choose two existing titanium full-rim styles.

One rectangular business frame.
One round or panto-style frame.

The brand adds a small inside-temple logo, chooses silver and gunmetal colors, and uses a branded hard case with a cleaning cloth.

This is a practical first titanium collection.

It does not require a new mold.
It does not need too many colors.
It keeps MOQ more manageable.
It allows the brand to test customer response.

If the product sells well, the brand can later move into custom colors, exclusive temple designs, or new frame development.

That is a safer path.

Existing frames do not mean the product has to look generic.

A good frame, clean logo, right color selection, and consistent packaging can still feel like a real brand product.

2.2 Semi-Custom Titanium Eyewear

Semi-custom titanium eyewear sits between existing frames and fully custom frames.

This option is useful when a brand wants more identity, but does not want the cost and risk of full custom development yet.

Semi-custom work may include:

• custom frame color
• special matte or brushed finish
• temple logo customization
• custom nose pads
• lens option changes
• branded packaging
• product card design
• limited design adjustments

For example, a designer eyewear brand may choose an existing titanium frame shape, but request a brushed champagne finish, beta titanium temples, subtle laser engraving, and a premium case.

The frame shape is not fully new.

But the product feels more branded.

This is often a good step for brands that already know their customer, but are not ready for new tooling.

MOQ for semi-custom projects is usually higher than basic private label using existing frames, because the factory needs extra preparation.

Custom color needs color testing.
Special finishing needs process control.
Custom nose pads or temples may need component preparation.
Packaging may have its own MOQ.

But it is still usually easier than a fully custom frame project.

Semi-custom is a good middle path.

It gives the brand more uniqueness without making the first order too heavy.

2.3 Fully Custom Titanium Frames

Fully custom titanium frames are the deepest level of OEM development.

This option is best for mature brands.

It may involve:

• new frame shape
• new bridge design
• new temple design
• new welding fixture
• custom hinge
• exclusive rim shape
• new mold or tooling
• special surface finishing
• multiple sample revisions
• fitted lens testing

This kind of project is suitable for:

• designer eyewear brands
• premium optical collections
• established private label brands
• brands with clear design language
• brands with long-term repeat order plans
• buyers who need exclusive products

For example, a designer brand may want a custom titanium frame with a unique bridge, ultra-thin rim, beta titanium temples, and a signature endpiece detail.

That kind of design can build strong brand identity.

But it also requires more work.

The factory needs to check whether the frame is structurally stable.
The bridge must be strong enough.
The temples must feel comfortable.
The welding fixture may need adjustment.
The surface finishing must be tested.
The frame should be checked with lenses.

That is why fully custom titanium eyewear has higher sampling cost and higher MOQ.

It is not just “changing a style.”

It is developing a new product structure.

For new brands, this may be too much for a first order.

For mature brands, it can be worth it.

The key is having a clear sales plan.

Without that, fully custom development can create unnecessary pressure.

3. How Titanium Material Affects MOQ and Cost

Material choice is one of the biggest reasons titanium eyewear MOQ changes.

When buyers hear “titanium frames,” they may think it is one material category.

But in real production, titanium eyewear may use different materials in different parts of the frame.

Pure titanium.
Beta titanium.
Titanium alloy.
Mixed titanium structures.

Each material has a different cost, processing method, and QC requirement.

So the MOQ should not be discussed only at the frame level.

It should also be discussed by material and component.

A pure titanium front with beta titanium temples is not the same as a titanium alloy frame.
A full pure titanium custom structure is not the same as an existing titanium frame with standard colors.

The material decision affects both price and production planning.

3.1 Pure Titanium

Pure titanium is often used for premium titanium eyewear.

It is common in:

• premium optical frames
• designer eyewear
• lightweight frame fronts
• high-end retail collections
• minimalist titanium frames

Pure titanium is attractive because it has a clear premium story.

It is light.
It is corrosion-resistant.
It feels clean and refined.
It works well for optical frames when the structure is properly designed.

But pure titanium can also increase cost and MOQ.

Why?

Because the material cost is higher than basic metal options. The processing needs more control. Welding needs more care. Surface finishing also needs a higher standard, especially for premium retail frames.

For example, a pure titanium frame front needs to keep its shape after prescription lenses are fitted.

If the rim is too thin, the frame may deform.
If the welding is weak, the frame may not pass long-term use.
If the finish is uneven, the product loses its premium feeling.

So pure titanium is not just a material upgrade.

It is a production responsibility.

That is why pure titanium projects usually need more careful sampling and QC.

3.2 Beta Titanium

Beta titanium is often used for temples and flexible parts.

Its value is elasticity.

A good beta titanium temple can improve comfort because it gives controlled flexibility and recovery.

This makes beta titanium useful for:

• flexible temples
• lightweight comfort frames
• long-wear optical frames
• business eyewear
• premium daily prescription frames

But beta titanium can also affect cost.

Because it is not enough to simply use beta titanium and call the product comfortable.

The factory needs to control:

• temple shape
• rebound force
• opening angle
• left-right consistency
• side pressure
• long-time wearing comfort

For example, a beta titanium temple may feel flexible when bent by hand.

But after 30 minutes of wear, it may press too much on the side of the head if the rebound force is too strong.

That creates a comfort problem.

So beta titanium adds value, but it also adds testing.

This is why brands should not see beta titanium only as a material name.

It is a comfort system.

The MOQ and cost may increase because the temples need better forming, adjustment, and consistency control.

3.3 Titanium Alloy

Titanium alloy is often used for more cost-controlled projects.

It can be suitable for:

• entry-level titanium collections
• wholesale titanium eyewear
• private label titanium frames
• mixed-material frames
• first market test projects

The advantage is that cost may be easier to manage.

For some brands, this is practical.

Not every first order needs a fully premium pure titanium structure.

A titanium alloy frame with good finishing, stable construction, and honest material description can still be a useful product for certain markets.

But the material claim must be accurate.

If the frame is titanium alloy, do not market it as pure titanium.

This matters especially for Western optical customers and premium eyewear buyers.

A lower-cost material can still be acceptable if the positioning is honest.

But a wrong claim can damage trust.

So titanium alloy can help reduce cost and sometimes make MOQ more flexible, but it should be used with clear product positioning.

3.4 Mixed Titanium Structures

Many good titanium frames use mixed material structures.

This is very common.

For example:

• pure titanium front + beta titanium temples
• titanium alloy front + beta titanium temples
• pure titanium bridge + beta titanium arms
• titanium frame front + stainless or alloy components in selected parts

This can be a smart way to balance cost, comfort, and product value.

For example, a brand may choose a pure titanium front because the front needs stability and premium positioning.

Then it uses beta titanium temples because the temples need flexibility and comfort.

This is often more logical than using one material everywhere.

Another brand may choose titanium alloy for the front and beta titanium temples for a more cost-controlled but comfortable product.

The key is to define the material by component.

For MOQ planning, brands should ask:

• What material is used for the front?
• What material is used for the temples?
• Are the hinges standard or customized?
• Are there beta titanium parts?
• Are material claims supported?
• Does each material require a different production minimum?

Mixed structures can be very practical.

But they need clear communication.

Otherwise, the buyer may think the whole frame is pure titanium, while the supplier is quoting a mixed-material product.

That misunderstanding can create problems later.

4. How Frame Structure Affects MOQ

Frame structure also affects MOQ and sampling cost.

A full-rim titanium frame is usually easier to control than a rimless titanium frame.

A standard optical frame is usually easier than an 8-base titanium sunglass.

A simple full-rim frame may need fewer sample revisions than a special hinge, high-wrap, or rimless structure.

So when brands discuss MOQ, they should also discuss structure.

Because structure decides how difficult the frame is to produce, assemble, and inspect.

4.1 Full-Rim Titanium Frames

Full-rim titanium frames are usually the most practical option for many first titanium projects.

They are more stable and easier to control.

They are suitable for:

• private label titanium frames
• RX-ready optical frames
• optical retail collections
• business titanium eyewear
• designer optical frames
• first titanium eyewear launches

The advantage is lens stability.

The frame fully surrounds the lens, so it is easier to hold prescription lenses securely.

For brands, this usually means lower fitting risk and easier bulk QC.

For example, a new optical brand may start with two full-rim titanium frames.

One square shape.
One panto shape.
Two colors: silver and gunmetal.

This is a clean and realistic first order.

The MOQ is usually easier to plan than a complex rimless or sports sunglass project.

But full-rim frames still need checking.

The rim groove must be accurate.
The frame should not deform after lens fitting.
The bridge and endpieces must be stable.

Full-rim is easier.

But it still needs proper titanium frame QC.

4.2 Semi-Rimless Titanium Frames

Semi-rimless titanium frames are more complex.

They look lighter and more minimal, but the lens holding system needs more attention.

The upper rim and nylon wire must work together.

If the nylon wire is weak, the lens may loosen.
If the groove is too shallow, the lens may not sit properly.
If the lens edge is not processed well, the frame may feel unstable.

This affects sampling cost because the factory may need to test:

• lens grooving
• nylon wire tension
• upper rim strength
• lens edge quality
• assembly stability
• repairability

Semi-rimless frames are suitable for:

• lightweight business eyewear
• minimalist optical collections
• semi-premium retail lines
• mature private label brands

For a first titanium project, semi-rimless can still work.

But brands should not choose it only because it looks lighter.

They should confirm lens fitting and stability first.

If the brand sells through optical retailers, semi-rimless frames must also be easy enough for opticians to fit and adjust.

That practical point matters.

4.3 Rimless Titanium Frames

Rimless titanium frames usually require more careful sampling and QC.

They may look simple, but technically they are sensitive.

The lens becomes part of the structure.

That means the frame relies on:

• drilling accuracy
• screw stability
• bushing quality
• lens thickness
• bridge connection
• temple connection
• repairability
• shipping protection

For example, a rimless titanium frame can look very premium and lightweight.

But if the screws loosen easily or the lens holes are not drilled cleanly, the product quickly feels low quality.

This is why rimless projects may have higher sampling cost.

The sample needs to prove more than appearance.

It must prove that the lens connection is stable, the screws hold well, and the product can survive shipping and daily use.

Rimless titanium frames are suitable for mature optical brands, business eyewear collections, and premium minimalist products.

But for a new brand’s first order, a complex rimless custom design may be risky.

It can be done.

But the brand should be ready for more technical review.

4.4 Titanium Sunglasses and Curved Structures

Titanium sunglasses can also increase MOQ and sampling work.

Especially when the product uses curved structures.

For example:

• 6-base titanium sunglasses
• 8-base titanium sunglasses
• wrap-style titanium frames
• polarized titanium sunglasses
• titanium sports sunglasses

A curved titanium sunglass is not just an optical frame with dark lenses.

The frame curve and lens curve must match.

The higher the curve, the more important the lens fitting becomes.

An 8-base titanium sunglass may need more testing because the frame has stronger wrap.

Brands need to check:

• lens base curve
• frame base curve
• polarized lens compatibility
• lens distortion
• frame stress after assembly
• nose pad height
• temple angle
• cheek clearance
• outdoor wearing comfort

This can increase sampling time and cost.

For a first titanium sunglass project, 6-base may be easier than 8-base if the product is lifestyle or optical retail focused.

8-base should be chosen when the brand clearly needs stronger wrap for fishing, sports, or outdoor performance.

Not just because it sounds more technical.

5. How Surface Finishing and Color Affect MOQ

Surface finishing and color are major MOQ drivers in titanium eyewear.

Many buyers underestimate this.

They may think:

“Same frame, just change the color.”

But in titanium production, color and finish are not always simple.

A standard silver or gunmetal color may be easier.

A custom matte navy, brushed champagne, two-tone finish, or special IP coating may require more testing, more setup, and a higher production minimum.

The finish affects both cost and defect rate.

That is why brands should choose colors carefully, especially for first orders.

5.1 Standard Colors

Standard titanium frame colors usually make MOQ easier to manage.

Common standard colors include:

• silver
• gunmetal
• black
• gold
• rose gold

These colors are often more familiar to the factory.

The process is more stable.
The sample approval is faster.
Bulk consistency is easier to control.
The MOQ may be more flexible.

For example, a new private label titanium eyewear brand may start with silver and gunmetal.

These colors work for many optical markets.

They look professional.
They are easy to wear.
They fit business and daily eyewear positioning.

This is a practical first step.

The brand can test market response first.

Then later add champagne, navy, matte black, or special brushed finishes after sales data is clearer.

Standard colors are not boring.

They are lower-risk.

That matters for the first titanium order.

5.2 Custom Colors

Custom colors can make a product more branded.

But they usually increase MOQ and sampling cost.

Why?

Because custom color requires:

• color sample development
• color matching
• plating or coating preparation
• surface testing
• defect control
• sample-to-bulk consistency checking

For example, a brand may want a matte navy titanium frame.

The color looks excellent in the design concept.

But matte navy may be harder to control than standard silver or gunmetal.

The surface tone may shift slightly between batches.
The matte texture may not look even on every piece.
The welded areas may react differently.
The color may look different under retail lighting and studio lighting.

So the factory needs to test and control the process.

That extra work can affect MOQ.

Custom color is good when the brand has a strong visual direction.

But for first orders, it should be used carefully.

A better plan may be:

one custom color + one or two standard colors.

That gives uniqueness without making the project too heavy.

5.3 Matte, Brushed, Polished and Sandblasted Finish

Different finishes also affect cost and production difficulty.

Matte finish looks modern and understated, but it needs even surface texture. If the finish is uneven, the frame can look cheap.

Brushed finish gives a refined technical feeling, but the brushing direction and texture must be consistent.

Polished finish looks more elegant and retail-ready, but scratches and fingerprints are more visible.

Sandblasted finish can look premium, but surface uniformity must be controlled carefully.

IP coating can create stronger color and durability options, but it may have higher setup and batch requirements.

For example, a brushed titanium frame may look simple, but if the front and temples have different brushing texture, the product feels inconsistent.

A polished gold frame may look beautiful, but if micro-scratches appear easily during handling, the customer will notice.

So finish selection should match the product level and customer use.

The more special the finish, the more likely MOQ and sampling cost will rise.

5.4 Two-Tone and Special Finish

Two-tone finishes and special effects are more complex.

They may require:

• masking process
• color separation
• extra handling
• more inspection
• higher defect risk
• longer sampling time

For example, a titanium frame with a black front and gold temples may sound simple.

But if the color separation is not clean, the frame will look rough.

A two-tone finish may also create color matching issues between different parts.

Special finishing is better for mature brands that already have a clear sales plan.

For a first order, too many special finishes can make MOQ and QC harder to control.

A practical approach is to keep the first order simple:

standard color, clean finish, strong frame shape, subtle logo, practical packaging.

Then add more special finishes after the product proves itself.

6. How Logo Customization Affects MOQ and Sampling Cost

Logo customization sounds small.

But it can still affect sampling cost, production setup, and MOQ.

For titanium eyewear, this is especially true because the frame surface is harder, thinner, and usually more premium than basic plastic eyewear.

A logo on titanium should not look random.

It should look clean, durable, and suitable for the product level.

A large printed logo may be fine for promotional eyewear.
But on a premium titanium optical frame, it can quickly feel cheap.

So logo customization is not only about adding the brand name.

It is about choosing the right position, method, size, and cost level.

6.1 Logo Placement

Common logo positions include:

• temple outside
• temple inside
• lens corner
• nose pad
• bridge
• packaging

Each position affects both appearance and production.

For example, an inside-temple logo is often better for premium titanium eyewear.

It keeps the frame clean when worn.
It gives the brand identity without making the product look promotional.
It works well for designer and optical retail frames.

An outside-temple logo is more visible.

That can work for wholesale, private label, or brand-recognition projects.

But if the logo is too large, the frame may lose its premium feeling.

For rimless titanium glasses, brands may also consider logo placement on the lens or packaging instead of forcing a visible logo on the frame.

For titanium eyewear, logo placement should match the product positioning.

Subtle for premium.
Visible for promotional.
Clean for optical retail.
Consistent for private label.

6.2 Logo Methods

Logo method also affects cost and MOQ.

Common methods include:

• laser engraving
• pad printing
• etching
• metal logo
• hot stamping on packaging
• embossing on case

Laser engraving is often a good option for titanium frames because it looks clean and durable.

It works well for inside temples, small brand marks, and premium private label eyewear.

Pad printing can be more cost-friendly, but it may not feel as premium if the logo is large or placed too visibly.

Etching can create a refined look, depending on the frame design and surface finish.

Metal logo can add a stronger brand detail, but it may increase cost, require extra components, and sometimes create MOQ pressure.

For example, a small laser logo inside the temple may be easier and cleaner than a custom metal logo plate.

Especially for a first order.

The logo should not make the project more complicated than necessary.

A good logo method should support the product.

Not slow it down.

6.3 Small Logo vs Large Logo

For titanium eyewear, smaller branding usually works better.

This is especially true for Western premium markets.

Many customers buying titanium optical frames prefer clean design. They want the frame to feel refined, not loud.

A large logo may create the wrong impression.

For example, a pure titanium business frame with a big white logo on the outside temple may start to look like a promotional giveaway.

But the same frame with a small laser logo inside the temple can feel much more professional.

This affects MOQ indirectly.

A large or complex logo may require more testing, extra printing setup, or higher rejection risk if alignment is not perfect.

A small clean logo is usually easier to control.

For first titanium orders, brands should keep logo customization simple:

small size, clear position, durable method, and consistent placement.

That is usually enough.

6.4 Packaging Logo MOQ

Many brands focus on frame MOQ and forget packaging MOQ.

But packaging can easily affect the final order quantity.

Customized packaging may include:

• cleaning cloth logo
• hard case logo
• leather case logo
• retail box printing
• warranty card
• product card
• barcode label
• outer sleeve

Each packaging item may have its own MOQ.

For example, a brand may want only 300 titanium frames.

The frame MOQ may be acceptable.

But the custom printed box supplier may require 1,000 pieces.
The custom cleaning cloth may also have its own MOQ.
The product card printing may have another minimum.

So the real project MOQ may be driven by packaging, not the frame.

For first orders, a practical solution is:

standard case + custom cleaning cloth + product card.

Or:

standard premium case + logo sticker + branded card.

This keeps the product private label without making packaging too heavy.

Packaging should help the project launch.

It should not block the project.

7. How Lens Options Affect MOQ

Lens options can also change MOQ and sampling cost.

This is especially true when the titanium eyewear project is not just frame-only.

A titanium optical frame with demo lenses is one thing.

A titanium sunglass with polarized nylon lenses is another thing.

A prescription-ready titanium frame is one thing.

A complete finished prescription titanium eyewear order is another thing.

So before discussing MOQ, brands should decide whether the project includes lenses — and what kind.

7.1 Demo Lenses vs Finished Lenses

Many optical frames are shipped with demo lenses.

Demo lenses are mainly used to keep the frame shape and support display.

They are not final prescription lenses.

If the brand only orders RX-ready titanium frames with demo lenses, MOQ is usually easier to control.

But if the brand wants finished lenses, the project becomes more complex.

Finished lenses may include:

• plano blue light lenses
• sun lenses
• polarized lenses
• reading lenses
• prescription lenses
• mirror lenses
• coated lenses

Each lens type may have its own material, coating, color, and MOQ.

For example, a titanium frame with demo lenses is mostly a frame project.

A titanium sunglass with polarized lenses becomes a frame + lens project.

That affects sample cost, lead time, and bulk quantity.

7.2 Prescription-Ready Frames

If the brand only needs prescription-ready frames, the factory mainly needs to make sure the frame can support RX lens fitting.

Important points include:

• frame size
• lens height
• groove accuracy
• rim strength
• bridge stability
• PD compatibility
• lens thickness risk
• frame adjustment after lens fitting

In this case, the lenses are usually fitted later by an optical shop or lab.

This model can be good for:

• optical retailers
• frame distributors
• private label optical brands
• stores with local lens labs

MOQ may be easier than complete prescription glasses because the factory does not need to process individual prescriptions.

But the frame still must be tested properly.

A frame that looks good with demo lenses may not work well with real RX lenses.

So RX-ready does not mean “no lens concern.”

It means the lens fitting responsibility needs to be planned clearly.

7.3 Finished Optical Lenses

If the brand wants finished optical lenses, MOQ and production planning become more detailed.

Finished optical lenses may include:

• plano lenses
• blue light lenses
• reading lenses
• prescription lenses
• clear lenses with AR coating
• UV protection lenses
• high-index prescription lenses

For example, a private label brand may want titanium frames with finished blue light lenses.

That means the factory must control not only the frame, but also lens clarity, coating, reflection, lens color, and fitting.

If reading lenses are included, SKU planning becomes important.

For example:

2 frame colors × 5 reading powers = 10 SKUs.

If the brand adds 3 frame styles, it becomes 30 SKUs.

That affects MOQ, packaging labels, QC, and inventory.

So lens options should be kept simple for first orders.

A clean first setup is usually better than a complicated SKU plan.

7.4 Titanium Sunglass Lenses

Titanium sunglasses are more sensitive because lens type strongly affects the final product.

Common sunglass lens options include:

• TAC lenses
• CR-39 lenses
• PC lenses
• nylon lenses
• polarized lenses
• mirror coated lenses
• 6-base lenses
• 8-base lenses

Each option has a different cost and technical requirement.

For example, TAC polarized lenses may work for cost-friendly lifestyle sunglasses.

CR-39 may fit premium fashion titanium sunglasses.

PC may work for lightweight outdoor sunglasses.

Nylon may be better for higher-wrap or performance-oriented designs.

If the sunglass has a 6-base or 8-base curve, lens base curve matching becomes very important.

The higher the curve, the more careful the lens fitting must be.

That can increase sampling cost.

Especially if polarized lenses or mirror coatings are included.

7.5 RX Sun or High-Curve Lens Programs

RX sun lenses and high-curve titanium sunglasses can make the project more complex.

This is especially true for 8-base designs.

Brands need to check:

• prescription range
• lens base curve
• frame base curve
• optical distortion
• polarized lens compatibility
• frame stress after lens fitting
• lens thickness
• wearing comfort

For example, an 8-base titanium sunglass may look excellent for fishing or outdoor use.

But if the brand wants RX sun compatibility, the project needs more careful review.

High-curve prescription lenses can have limitations.

The product may still be possible, but it needs technical confirmation before sampling.

This is why lens decisions should happen early.

Do not finalize the frame first and ask about lens options later.

For titanium sunglasses, frame and lens should be developed together.

8. How Packaging Affects Bulk Order Quantity

Packaging is often the hidden MOQ driver.

Many brands think the frame decides the MOQ.

But sometimes the packaging decides it.

A titanium eyewear order may use a manageable frame quantity, but the custom case, cloth, box, card, or label may require a higher minimum.

This is why packaging should be discussed early.

Not after the frame sample is approved.

8.1 Basic Packaging

Basic packaging is suitable for lower MOQ projects, wholesale orders, and frame-only supply.

It may include:

• polybag
• simple pouch
• demo lens protection
• standard case
• basic carton packing

This can work well for:

• optical store frame-only orders
• wholesale titanium frames
• distributor programs
• first private label tests
• low-risk market trials

For example, a wholesaler may not need full retail packaging if the frames will be fitted with lenses and repacked locally.

In that case, practical protection matters more than luxury presentation.

Basic packaging helps control cost and MOQ.

But it should still protect the frame well.

Titanium frames are lightweight, but they can still be scratched, bent, or misaligned during shipping if packing is too weak.

8.2 Private Label Packaging

Private label packaging gives the product stronger brand identity.

It may include:

• hard case
• microfiber cloth
• retail box
• warranty card
• product card
• barcode label
• QR code
• care instruction card

This is suitable for:

• eyewear brands
• optical retailers
• e-commerce brands
• designer titanium collections
• premium private label projects

For example, a private label titanium eyewear brand may use a standard hard case, custom microfiber cloth, and printed product card.

That is already enough to make the product feel branded.

The brand does not always need a fully custom box from the first order.

A full custom box can be added later after sales are stable.

This helps reduce packaging MOQ risk.

8.3 Premium Titanium Eyewear Packaging

Premium titanium eyewear often needs stronger packaging because the product price is higher.

Premium packaging may include:

• leather case
• premium hard case
• custom retail box
• material card
• warranty card
• branded cleaning cloth
• screwdriver for rimless frames
• repair kit
• display sleeve

For example, a rimless titanium eyewear project may include a small screwdriver because the frame uses screws and drilled lenses.

That detail is practical and supports the premium feel.

A designer titanium frame may include a material card explaining pure titanium or beta titanium.

That helps the customer understand why the product costs more.

But premium packaging can increase MOQ and cost quickly.

So brands should decide which packaging details are necessary and which can wait.

A premium product needs good packaging.

But it does not need every packaging option in the first order.

8.4 How to Start Small Without Overbuilding Packaging

For first titanium eyewear orders, brands can keep packaging practical.

A good low-risk setup may include:

• standard premium case
• custom cleaning cloth
• product card
• simple outer box
• barcode or SKU label if needed

This creates a branded experience without forcing high packaging MOQ.

For example, a new titanium eyewear brand may start with standard black hard cases, custom microfiber cloths, and a clean product card.

Later, after the best-selling models are confirmed, the brand can invest in custom boxes, special cases, or more premium retail packaging.

This is a better growth path.

The product looks professional.

But the order does not become too heavy.

Packaging should match the brand stage.

Not just the brand dream.

9. Sampling Cost: What Are Brands Paying For?

Sampling cost is often misunderstood.

Some buyers think a sample fee is only the cost of making one frame.

But for custom titanium eyewear, sampling is not just about producing one piece.

It is the stage where the factory checks whether the product can actually be made, worn, fitted with lenses, finished properly, and repeated in bulk production.

That is why titanium eyewear sampling can cost more than basic plastic frame sampling.

The sample is not only a preview.

It is a technical confirmation.

9.1 Material Preparation

Titanium eyewear samples may require special material preparation.

Depending on the project, the sample may involve:

• pure titanium material
• beta titanium temples
• titanium alloy components
• special hinges
• screws
• nose pads
• rimless parts
• custom bridge or temple components

For example, if a brand wants a pure titanium front with beta titanium temples, the factory needs to prepare different materials for different frame parts.

That is not the same as using one standard metal material for the whole frame.

If the project uses an existing frame, material preparation is simpler.

If the project uses a new structure or special material combination, preparation becomes more expensive.

So the sampling cost depends on how much new material work is required.

9.2 Sample Making Labor

Titanium frame samples usually require more manual work.

The process may include:

• cutting
• forming
• bending
• welding
• polishing
• surface finishing
• hinge assembly
• nose pad installation
• frame adjustment
• lens fitting check

A titanium sample cannot be judged only by shape.

The frame needs to be aligned.
The temples need to open smoothly.
The bridge must sit correctly.
The welds should be clean.
The surface finish should match the approved direction.

This takes skilled labor.

For example, a custom titanium optical frame with a thin rim may need several rounds of adjustment before the front looks balanced and the lens groove fits correctly.

That labor is part of the sample cost.

It is not just material cost.

9.3 Surface Color Testing

If the project includes custom color or special finishing, the sample cost may increase.

Color testing can involve:

• plating test
• IP coating test
• matte finish test
• brushed finish test
• sandblasted surface test
• color matching
• coating adhesion review
• welded area color check

For example, a brand may want a brushed champagne titanium frame.

That sounds like one color.

But the factory needs to test whether the brushed texture looks consistent, whether the champagne tone matches the brand’s expectation, and whether the color looks stable on both the front and temples.

If the frame uses different titanium materials in different parts, color matching may become even more sensitive.

This is why custom finish samples cost more than standard silver or gunmetal samples.

Color approval is technical.

Not only visual.

9.4 Lens Fitting Test

Lens fitting tests can also affect sampling cost.

This is especially important for:

• RX-ready titanium frames
• semi-rimless frames
• rimless frames
• titanium sunglasses
• 6-base sunglasses
• 8-base sunglasses
• polarized lenses
• RX sun lens programs

For example, a full-rim titanium optical frame may need to be tested with real lenses to confirm whether the rim holds properly.

A semi-rimless frame needs lens grooving and nylon wire testing.

A rimless frame needs drilling accuracy and screw stability checks.

A titanium sunglass with 8-base curve needs lens curve matching and distortion review.

These tests take time.

But they help avoid bigger problems later.

A frame that looks good without lenses may fail after real lens assembly.

So lens fitting tests are often worth the cost.

9.5 Revision Cost

Titanium frame samples may need revisions.

This is normal.

Common revision points include:

• bridge width
• bridge height
• rim thickness
• temple pressure
• hinge feel
• nose pad position
• lens groove depth
• surface color
• logo size
• frame curve
• lens fitting stability

For example, the first sample may look good, but the temples feel too tight after 30 minutes of wear.

Or the matte black finish may look slightly uneven.

Or the lens fitting may be too tight and create frame stress.

These issues need correction before bulk production.

That is what sampling is for.

Sampling cost is not only the cost of one sample frame.

It is the cost of finding and fixing the technical problems before they become bulk problems.

That is why brands should treat sampling as an investment.

Not as a small accessory cost.

10. How to Reduce MOQ Risk for First Orders

New brands often want low MOQ.

That makes sense.

Before the market is proven, it is risky to order too many titanium frames.

But reducing MOQ risk does not mean making the product cheap or generic.

It means choosing the right customization steps first.

A smart first order should focus on what customers can see, feel, and understand — without overcomplicating production.

10.1 Start with Existing Titanium Frames

The easiest way to reduce MOQ risk is to start with existing titanium frames.

This is especially useful for:

• new private label brands
• optical retailers testing titanium collections
• wholesalers testing demand
• e-commerce eyewear brands
• first-time OEM buyers

Using existing frames helps reduce:

• tooling cost
• development time
• structure risk
• sample revisions
• fitting uncertainty

For example, a brand can start with two proven titanium optical frame styles.

One square.
One round.
Two colors.
Small logo.
Simple premium packaging.

That is enough for a first titanium line.

The brand can test market response before investing in exclusive molds or complex finishes.

This is not a weak strategy.

It is a realistic one.

10.2 Limit Colors

Color is one of the easiest ways to create inventory pressure.

Many brands want five or six colors at launch.

But for titanium eyewear, that can quickly increase MOQ, cost, and QC work.

A better first-order plan is usually:

• 1–2 core colors
• silver
• gunmetal
• black
• maybe one brand color if needed

For example, silver and gunmetal are safe for many optical markets.

They look professional.
They match titanium material positioning.
They are easier to sell across customer groups.

After the first order, the brand can check which color sells best.

Then it can add champagne, rose gold, navy, matte black, or two-tone finishes later.

Start simple.

Expand with data.

That is how MOQ risk is controlled.

10.3 Use Subtle Logo Customization

Logo customization should be controlled in the first order.

A small logo is usually enough.

Good first-order options include:

• inside temple laser engraving
• small outside temple logo
• branded cleaning cloth
• branded case
• product card

Avoid making the first order too complicated with:

• large metal logo plates
• multiple logo positions
• complicated color printing
• custom hardware
• heavy decorative branding

For premium titanium eyewear, subtle branding often looks better anyway.

A small inside-temple logo can make the product feel private label without damaging the clean titanium look.

The logo should support the frame.

Not take over the frame.

10.4 Keep Packaging Practical

Packaging is another place where brands can reduce MOQ risk.

Instead of starting with a fully custom box, brands can use a practical setup:

• standard premium case
• custom microfiber cloth
• simple product card
• standard outer box
• barcode label if needed

This gives the product a branded feeling without creating too much packaging MOQ pressure.

For example, a brand may use a standard black hard case, add a branded cleaning cloth, and include a clean product card explaining the titanium material.

That can already feel professional.

A fully custom retail box can be added later after the product has stable sales.

For first orders, packaging should protect the product and support the brand.

It does not need to become the most complicated part of the project.

10.5 Test Market Before New Mold

New molds should usually come after market validation.

Not before.

A new mold may be worth it when the brand already knows:

• which frame shape sells
• which customer group is buying
• which price point works
• which colors are reordered
• which lens program is needed
• whether repeat orders are likely

For a first order, guessing all of that is risky.

A brand may invest in an exclusive titanium frame shape, but later discover the market prefers another style.

That is expensive.

A safer path is:

Start with existing or semi-custom titanium frames.
Collect sales data.
Identify best sellers.
Then develop exclusive molds.

Low-risk first orders are not about making the product generic.

They are about customizing the right parts first.

11. MOQ Planning by Brand Type

Different brands should not plan titanium eyewear MOQ in the same way.

A new private label brand and a mature designer eyewear brand do not have the same risk level.

An optical retailer and a sunglasses brand also need different planning.

So MOQ should be matched to the buyer’s real business stage.

The goal is not just to order less.

The goal is to order in a way that makes the product possible to sell, reorder, and improve.

11.1 New Private Label Eyewear Brands

For new private label eyewear brands, the first titanium order should stay controlled.

A good direction is:

• existing titanium frames
• 1–2 frame styles
• 2 core colors
• small logo
• standard premium case
• branded cleaning cloth
• simple product card

For example, a new brand can start with one full-rim titanium optical frame and one lightweight semi-rimless frame.

Both use silver and gunmetal.

The brand adds a small inside-temple logo and a clean packaging set.

This is already enough to test the titanium category.

The brand does not need five frame shapes, six colors, custom hinges, custom mold, and full luxury packaging in the first order.

That may look exciting.

But it also creates inventory pressure.

For new brands, the first goal is market validation.

Not maximum customization.

11.2 Designer Eyewear Brands

Designer eyewear brands usually need stronger product identity.

So their MOQ planning may include more semi-custom or fully custom work.

A good direction may include:

• pure titanium front
• beta titanium temples
• refined frame proportion
• matte, brushed, or polished finish
• subtle branding
• physical color sample approval
• premium packaging
• sample revisions before bulk production

For example, a designer brand may want a unique bridge shape and a special brushed finish.

That is reasonable if the brand already has a clear design language and stable customer base.

But this type of project usually needs higher sampling cost and longer development time.

Because the frame is not just being selected.

It is being developed.

Designer brands should prepare for more sample discussions around structure, comfort, welding, surface finish, and lens fitting.

That is normal for premium titanium eyewear.

11.3 Optical Retailers

Optical retailers should focus on RX compatibility and reorder stability.

For them, MOQ planning should not only look at frame style.

It should also look at whether the frame can work with real lenses in store.

A practical plan may include:

• RX-ready full-rim titanium frames
• standard colors such as silver, gunmetal, and black
• stable lens groove
• comfortable nose pads
• reliable hinge structure
• professional packaging
• clear material description

For example, an optical retailer may choose titanium frames that are easy for opticians to fit with prescription lenses.

That is more important than choosing a very complex custom design.

If the frame looks good but is difficult to fit, the retailer may not reorder.

For optical retail, product reliability is the business.

MOQ should support stable repeat orders.

11.4 Titanium Sunglasses Brands

Titanium sunglasses brands need to plan MOQ around both frame and lens.

This is especially true if the product uses polarized lenses, mirror coating, or 6-base / 8-base curves.

A practical first-order direction may include:

• confirm 6-base or 8-base early
• choose lens material early
• limit first-order lens colors
• test polarized lenses carefully
• avoid too many mirror coatings in the first order
• check outdoor wearing comfort
• approve complete frame + lens sample

For example, a brand developing titanium fishing sunglasses may want 8-base frames, polarized lenses, mirror coating, and several lens colors.

That sounds strong.

But for the first order, it may be better to choose one or two lens colors first and test the structure properly.

High-wrap titanium sunglasses need more technical control.

If the lens curve, frame curve, and temple angle are not right, the product may look good but wear poorly.

So MOQ planning for titanium sunglasses should be slower and more technical.

11.5 Wholesalers and Distributors

Wholesalers and distributors usually need proven styles and price stability.

They may not need heavy customization in the first order.

A good direction is:

• proven titanium frame styles
• standard colors
• practical packaging
• clear material description
• stable production quality
• better price control
• reorder-friendly SKUs

For example, a distributor may choose several titanium optical frames in standard silver, gunmetal, and black.

The frames should be easy to sell across different retailers.

In this case, overly specific custom colors or unusual structures may make the product harder to move.

For wholesalers, MOQ planning should focus on repeatability.

A stable product that can be reordered is often better than a very special product that is hard to sell again.

12. Common Mistakes Brands Make When Discussing MOQ

MOQ discussions can become confusing when brands and suppliers are not talking about the same thing.

One side may be thinking about frame quantity.

The other side may be thinking about color batch, packaging MOQ, lens minimum, or tooling cost.

That is why brands should break MOQ down clearly.

Here are the common mistakes.

Mistake 1: Asking Only “What Is Your MOQ?”

This question is too broad.

A better question is:

• What is the MOQ for existing titanium frames?
• What is the MOQ for custom color?
• What is the MOQ for logo customization?
• What is the MOQ for packaging?
• What is the MOQ for finished lenses?
• What is the MOQ for new tooling?

For example, the frame MOQ may be 300 pieces.

But the custom box MOQ may be 1,000 pieces.

If the buyer only asks for the frame MOQ, they may be surprised later.

So MOQ should be separated by project component.

That gives a more accurate production plan.

Mistake 2: Wanting Custom Mold with Small Test Quantity

A custom mold is usually not suitable for a very small test order.

Unless the brand has enough budget and a clear sales plan.

Custom mold development means more than making one shape.

It may require:

• design drawing
• tooling
• welding fixture
• sample revisions
• lens fitting test
• surface finish approval
• bulk stability testing

For a first order, this may be too heavy.

If the brand only wants to test the titanium category, existing or semi-custom frames are usually better.

Custom molds should be used when the brand is ready for a long-term product.

Not just a small trial.

Mistake 3: Adding Too Many Colors in the First Order

Too many colors can quickly increase MOQ and inventory pressure.

For example:

3 frame styles × 5 colors = 15 SKUs.

If each SKU needs a minimum quantity, the order becomes large very quickly.

This is especially risky for a new brand.

A better first plan may be:

2 frame styles × 2 colors = 4 SKUs.

That is much easier to manage.

After sales data comes in, the brand can expand colors.

Titanium eyewear does not need many colors to look premium.

Often, silver, gunmetal, black, and champagne are enough to start.

Mistake 4: Ignoring Packaging MOQ

Packaging MOQ is easy to forget.

But it can affect the whole project.

A brand may want a low MOQ titanium frame order, but also request:

• custom hard case
• custom leather case
• custom retail box
• custom cleaning cloth
• custom warranty card
• custom product card

Each item may have its own minimum.

So the order may become larger than expected.

For first orders, it is better to keep packaging flexible:

standard case, custom cloth, product card, and simple outer box.

That gives branding without too much pressure.

Packaging can always be upgraded later.

Mistake 5: Choosing Complex Structure Too Early

Some structures increase development risk.

Examples include:

• rimless titanium frames
• 8-base titanium sunglasses
• special hinge designs
• two-tone finishing
• custom beta titanium temples
• high-wrap sports structures

These can be excellent products.

But they need more testing.

For a first order, a simple full-rim titanium optical frame may be safer.

The brand can learn the supplier’s production quality, market response, and customer feedback first.

Then move into complex structures.

Good OEM development should grow step by step.

Mistake 6: Comparing MOQ Without Comparing Customization Level

Two suppliers may quote different MOQs.

That does not always mean one is better.

They may be quoting different project levels.

For example:

Supplier A quotes an existing titanium frame with standard color and simple logo.

Supplier B quotes pure titanium front, beta titanium temples, custom finish, custom case, and lens fitting test.

The MOQ will not be the same.

Before comparing, brands should make sure the conditions are equal.

Compare:

• material
• structure
• color
• finish
• logo
• lens
• packaging
• tooling
• QC standard

MOQ only makes sense when the customization level is clear.

13. OEM Recommendation: How We Help Brands Plan Titanium Eyewear MOQ

A good titanium eyewear supplier should not only give a number.

It should help the brand understand why that number exists.

The best MOQ plan should match the brand’s stage, product goal, budget, and sales channel.

A new brand needs low-risk entry.

A designer brand needs stronger identity.

An optical retailer needs RX compatibility.

A sunglasses brand needs frame-lens matching.

A wholesaler needs stable repeat styles.

Different buyer, different MOQ logic.

13.1 For Low-Risk First Orders

For low-risk first orders, we usually recommend:

• existing titanium frames
• small logo customization
• 1–2 standard colors
• standard premium case
• custom cleaning cloth
• simple product card
• physical sample approval before bulk order

This is suitable for new brands and private label buyers.

The product can still look professional.

But the project does not become too heavy.

The goal is to launch, test, and learn.

Not to over-customize before the market gives feedback.

13.2 For Premium Private Label Projects

For premium private label titanium eyewear, the project can go deeper.

A good direction may include:

• semi-custom frame selection
• pure titanium or beta titanium material plan
• custom finish if needed
• controlled color range
• subtle logo
• refined but practical packaging
• clear material card
• stricter sample-to-bulk standard

For example, a premium private label brand may start with two semi-custom titanium styles, one brushed finish, one matte finish, and a refined packaging set.

This creates a stronger brand impression without requiring a fully custom mold.

That is often a good balance.

13.3 For Fully Custom Titanium Eyewear

Fully custom titanium eyewear needs a more complete development plan.

Brands should prepare:

• design drawing
• material plan
• tooling review
• sample stages
• lens fitting test
• welding review
• surface finish approval
• realistic MOQ
• realistic lead time
• clear QC tolerance

For example, if a brand wants an exclusive titanium frame with a special bridge and custom temple profile, the supplier should review whether the structure is stable before sampling.

A design may look beautiful on paper.

But it must be wearable and producible.

Fully custom titanium eyewear should not be rushed.

It needs technical confirmation.

13.4 For Titanium Sunglasses OEM

For titanium sunglasses, MOQ planning should include lens planning from the start.

We usually recommend confirming:

• frame curve
• lens base curve
• 6-base or 8-base direction
• polarized lens option
• lens material
• mirror coating if needed
• frame stress after lens assembly
• outdoor wearing comfort
• first-order lens color range

For example, if the brand wants a high-wrap 8-base titanium sunglass, it should not launch with too many lens colors immediately.

First, confirm the frame-lens match.

Then expand colors after the structure is proven.

Titanium sunglasses are a frame-and-lens system.

MOQ should be planned that way.

13.5 For Long-Term Reorder Planning

MOQ planning should also consider reorders.

A first order is only the beginning.

To make future production easier, brands should keep:

• approved physical sample
• approved color sample
• material statement
• logo standard
• lens specification
• packaging reference
• QC tolerance
• best-selling SKU data

For example, if gunmetal sells better than rose gold, the next order should focus on gunmetal instead of repeating every color equally.

If one frame shape gets the best feedback, that shape can become the base for future custom development.

This is how brands reduce risk over time.

Start controlled.
Track sales.
Reorder stable SKUs.
Customize deeper later.

That is a practical growth path for titanium eyewear.

Conclusion: MOQ Should Be Planned Around the Product, Not Guessed

Custom titanium eyewear MOQ is not just one fixed number.

It depends on many parts of the project:

• material
• frame design
• structure
• color
• surface finish
• logo
• lens type
• packaging
• tooling
• sample revisions
• QC standard

So the smartest question is not only:

“How low can the MOQ be?”

The better question is:

“How can we build a titanium eyewear project with the right MOQ, the right customization level, and the right production risk?”

That is how brands make better decisions.

For a new brand, the best choice may be existing titanium frames, standard colors, small logo, and practical packaging.

For a mature designer brand, the best choice may be semi-custom or fully custom titanium development.

For an optical retailer, the best choice may be RX-ready full-rim titanium frames with stable reorder colors.

For a titanium sunglasses brand, the best choice may be to confirm lens curve, polarized option, and frame structure before expanding SKUs.

MOQ should follow the product strategy.

Not the other way around.

A professional titanium eyewear manufacturer should help brands break down MOQ by frame, material, color, logo, lens, packaging, and tooling.

That makes the project easier to start, easier to control, and easier to repeat.

Because a successful titanium eyewear order is not only about producing enough pieces.

It is about producing the right product, at the right customization level, with the right cost structure for the brand’s next step.

FAQ

FAQ 1: What is the MOQ for custom titanium eyewear?

The MOQ for custom titanium eyewear depends on the project.

Existing titanium frames with standard colors and small logo customization usually have more flexible MOQ.

Fully custom titanium frames with new tooling, custom colors, special finishes, custom lenses, and private label packaging usually require higher MOQ.

Brands should ask MOQ by component: frame, color, logo, lens, packaging, and tooling.

FAQ 2: Why is titanium eyewear sampling cost higher?

Titanium eyewear sampling cost is often higher because the sample may require material preparation, welding, polishing, surface finishing, frame adjustment, lens fitting tests, and sometimes tooling or fixture work.

The sample cost is not only for one frame.

It is for technical confirmation before bulk production.

FAQ 3: Can brands start private label titanium eyewear with low MOQ?

Yes.

Brands can usually start more easily by using existing titanium frames, standard colors, small logo customization, and practical packaging.

This is often better for first orders because it reduces tooling cost, sampling risk, and inventory pressure.

After market response is proven, the brand can move into custom molds, exclusive colors, or more complex structures.

FAQ 4: What increases MOQ for titanium glasses?

Several factors can increase MOQ, including:

• custom frame color
• special surface finishing
• new mold or tooling
• rimless structure
• 8-base titanium sunglasses
• polarized or custom lenses
• metal logo
• fully custom packaging
• complex temple or hinge design

The more custom the project is, the more production preparation is needed.

FAQ 5: Should new brands start with custom titanium molds?

Usually, no.

Most new brands are better starting with existing or semi-custom titanium frames first.

This allows them to test the market with lower development risk.

Custom molds are better for mature brands with clear sales forecasts, established design direction, and repeat order plans.